Instruction manual

FEATURES AND SERVICES
Interactions
The following features interact with Automatic Intercom.
Attendant Position Busy:
The inactive attendant is permitted to place Automatic Intercom
calls. Automatic Intercom calls to an inactive DTAC where the AUTO ICOM button is located
in one of the two rightmost button columns will not ring at the console, nor can they be
covered by the active attendant.
However, Automatic Intercom calls to an inactive SLAC will
ring there.
Bridging of System Access Buttons:
Calls on Automatic Intercom buttons on the principal
station are not accessible from bridged call appearances on the bridging station.
Coverage: Automatic Intercom calls are considered private and do not receive coverage.
Direct Group Calling: Automatic Intercom calls cannot be directed to DGC groups.
Exclusion: Any attempt to engage Exclusion while active on an Automatic Intercom call will
drop the other party.
Last Number Dialed: Numbers called using an AUTO ICOM button are not saved by the Last
Number Dialed feature.
Line Selection (Prime Line Preference): When the Automatic Intercom line is assigned Prime
Line status, the AUTO ICOM button must be pressed to activate the busy-to-idle reminder
even though the I-use LED is already lighted steadily.
Pickup: When an Automatic Intercom call is answered via the Pickup feature, the AUTO
ICOM status LED on the called voice terminal lights steadily. The called party can press
AUTO ICOM to enter the call at any time.
Administration Requirements
Voice Terminal Port:
● Assign AUTO ICOM buttons to voice terminals in pairs. Voice terminals can have
several AUTO ICOM buttons assigned for direct access to multiple stations.
2-56