Instruction manual

FEATURES AND SERVICES
Attendant System Alarm Indication
Description
This feature provides a visible alarm on the Attendant Console to alert the attendant to
problems detected by the system software. The ALARM LED on the Attendant Console will
flash whenever a detected fault persists longer than four minutes, or if more than five
transient faults per hour are detected.
The alarm indication should be reported immediately to
your AT&T Systems Technician.
The alarm type that causes an alarm indication is referred to as a Permanent System Alarm.
These alarms are faults that can cause degradation of service and require immediate
attention.
If a flashing ALARM button is pressed, the LED will change from flashing to steadily lit. A
new trouble situation will cause a steady ALARM LED to start flashing again. Only when the
trouble has been corrected will the LED turn off.
Considerations
The ALARM LED on the Attendant Console provides a warning as soon as the fault is
detected. This permits a quick response to system detected faults.
In a two-attendant system, both consoles track problems.
2-54