Instruction manual

Attendant Position Busy
Forwarding: If a PDC/FPDC is signed in at an inactive attendant console, then calls to this
PDC/FPDC will go to the active attendant (SLAC) or to the inactive attendant (DTAC only).
All calls to FPDCs not signed in will be transferred to the active attendant.
Night Service:
An inactive attendant that is a Directed Night Service receiver will receive
Night Service calls.
Park: A call parked on the inactive attendant console will return to the inactive console if the
call times out; calls parked via the Selector Console will return to the active console.
Personal Lines: All calls to trunks having an appearance in either of the two leftmost button
columns of a DTAC will ring normally at the inactive console. All calls to trunks having
appearances in either of the two rightmost button columns will not ring. If these trunks also
have an appearance at the active console, they will ring there even if they do not normally.
Program: The Program feature remains active at the inactive console.
Programmable Buttons:
All DSS, Flex DSS, and REP DIAL buttons remain active on the
inactive console.
Administration Requirements
Attendant Console (Voice Terminal) Port:
● Assign Position Busy button on DTAC. A Position Busy button is defaulted to the
SLAC; it can be assigned to another feature if desired.
● Assign COVER-IND buttons between consoles (DTAC only).
System
● Designate “backup” multiline voice terminal (single-SLAC systems only).
2-45