Instruction manual

Attendant Direct Extension Selection
Callback Queuing: Callbacks to the attendant do not flash at the associated Selector
Console.
Coverage: If the attendant receives a coverage call for a FPDC, the associated status LED
on the Selector Console will flash and then go dark when the call is answered by the
attendant.
Direct Group Calling: When all stations in a DGC group are busy, the DXS status LED on
the Selector Console lights.
Pooled Facilities: If a 1- or 2-digit FAC is used, the associated status LED on the Selector
Console will light steadily whenever all trunks in this group are busy. This does not occur
with 3- or 4-digit FACs.
Administration Requirements
Special Feature Ports:
● Assign a port on a ZTN79 ATL Station Circuit Pack for each Selector Console.
● Assign Group Select button hundreds groups.
System:
● Assign Selector Console Park codes.
● Park return time (0-240 seconds; default = 120).
Hardware Requirements
Requires an Attendant Selector Console, and a port interface on a ZTN79 ATL Station CP.
The Selector Console requires a KS-22911, List 1 Power Supply, associated 115V ac power
outlet, and a 400B-type Adapter. The 400B2 Adapter provides power to the console at the
wall jack. The Console connects to a port on the ZTN79 ATL Station CP.
Detailed connection information is provided in Figure 2-7. Descriptions of the Station
Interconnect Panel (SIP), Trunk Access Equipment (TAE), and associated cables and
adapters, as shown on the figures, are provided under “Connectivity” in Section 4.
2-37