Instruction manual

FEATURES AND SERVICES
A call parked via the Selector Console can be picked up at any voice terminal by dialing the
Park retrieval code ( ✶ 8 ) and the number on which the call is parked.
The rightmost button on the bottom row is a Test button.
When it is pressed, all DXS LEDs
will light sequentially; a second press allows individual LEDs to be tested and a third press
ends the test.
Considerations
When there are two Attendant Selector Consoles in the system the Group Select button
assignments are identical.
Whenever an administrative change is made to one console, the
other console is automatically changed.
Buttons on the Selector Console point to either station PDCs, FPDCs (FPDCs), Park codes,
DGC access codes, or pooled facilities. Calls extended by the Selector Console are directed
as described in the “Personal Dial Codes” feature description.
When a station calls the attendant, the associated LED on the Selector Console will flash
while the call is ringing and will light steadily when the attendant answers the call. The LED
will light steadily whenever the terminal is off-hook.
Station busy indication is not provided
for buttons pointing to FPDCs.
If a call to a PDC is directed to a COVER or LOOP button on the Attendant Console, the
covered status LED of the voice terminal on the Selector Console will flash and then go dark
when the call is answered by the attendant. If the covered call was intended for a FPDC that
was signed in at a terminal with attendant coverage, the Selector Console status LED
associated with the FPDC (if assigned) will flash. In this case, the Cover button status LED
will also flash (DTAC only).
A call can arrive at an Attendant Console SYSTEM ACCESS or LOOP button because the
PDC or FPDC is signed in at the Console or because the FPDC is not signed in anywhere.
For these calls, the status LED on the Selector Console will not light.
If the attendant extends a call to a station or DGC group and that call returns to the
attendant, the status LED of the called station or group on the Selector Console will flash
and then go dark when the call is answered by the attendant. This is true regardless of the
sign-in status of the PDC.
Interactions
The following features interact with Attendant Direct Extension Selection.
Attendant Position Busy:
The Selector Console functions normally when the associated
Attendant Console is in the inactive mode.
Attendant Return-Coverage-On-Busy/On-Don’t-Answer:
If a call to a FPDC is returned to the
attendant on a RTN-BUSY or RTN-DA button or on a LOOP button, the status LED of the
FPDC on the Selector Console will flash during ringing and go dark when answered.
2-36