Instruction manual

HARDWARE DESCRIPTION
ATL Cordless Telephone (5-Button) (PEC 3168MLC)
The ATL Cordless Telephone (Figure 4-22) consists of a handset plus a base. The telephone
with the handset placed in the cradle measures 5 inches wide, 2 1/2 inches high, and 8 1/4
inches deep, and weighs about 2 pounds and 9 ounces. The antenna on the base extends
about 2 feet. The base has the option to accept a 7-inch flexible antenna or a 9-inch rigid
antenna.
The base can be desk or wall mounted and requires access to standard
commercial power. The handset comes equipped with the following:
● Touch Dial Pad (not DTMF)
● 5 Line Appearance buttons and I-Use and Status LEDS
● Fixed Feature Buttons (* = with status LED)
Transfer
Hold
Channel Selection
Line status*
Handset On/Off*
● Message Waiting LED
● Low Battery LED and tone
● Number card
● Carrying adapter case
● Out-of-range of base tone
● Beep on handset button presses
● Antenna
● Battery.
The base comes equipped with the following:
● Channel display
● Telephone status LEDS
● Telephone mode switch
● Message waiting LED
4-52