Instruction manual

HARDWARE DESCRIPTION
7317H01A Voice Terminal (BlS-34D) (PEC 3167-DSB)
The 7317H01A 34-button voice terminal with display (Figure 4-18) is available for general use
and as a SLAC. In general use, it can be desk or wall mounted; as a console, it is normally
desk mounted. Display can be administered for SLACs and general use positions. The set
is about 9-1/4 inches wide, 9-1/4 inches deep, and (not including the handset) 1-1/2 inches
thick; when desk mounted, it is about 5-1/4 inches high in the back. The set comes
equipped with the following:
● Handset
● Touch Dial Pad (not DTMF)
● I-Use and Status LEDS
● Test/Program Switch (two positions: T for testing operation of LEDs and ringer; P for
programming feature buttons)
● Built-In Display Module
— Screen for call information and time displays
— Clock/Timer controls
— Contrast control for screen display
● Built-In Speakerphone With Volume Control
● Ringer/Button Click Volume Control
● Built-In HFAI Microphone
● Nine Fixed Feature Buttons (* = with status LED)
Conference
Hold
Message*
Drop
Recall
HFAI*
Transfer Speakerphone*
Microphone*
● 34 Feature Buttons (each equipped with I-Use and status LEDS)
For General Use:
—
All programmable; default assignments are System Access (2), Repertory
Dialing (2), Flex DSS (27), Send All Calls (1), Account Code Entry (1), and Last
Number Dialed (1).
For Use as a Switched Loop Attendant Console:
— Five predefined as loop buttons.
4-44