Instruction manual

HARDWARE DESCRIPTION
7316H01A Voice Terminal (BIS-34) (PEC 3167-34B)
The 7316H01A 34-button voice terminal (Figure 4-17) is available for general use or as a
Direct Trunk Attendant Console. It can be desk or wall mounted and is about 9-1/4 inches
wide, 9-1/4 inches deep, and (not including the handset) 1-1/2 inches thick; when desk
mounted, it is about 5-1/4 inches high in the back.
The set comes equipped with the
following:
● Handset
● Touch Dial Pad (not DTMF)
● I-Use and Status LEDS
● Test/Program Switch (two positions: T for testing operation of LEDs and ringer; P for
programming feature buttons)
● Built-In Speakerphone With Volume Control
● Ringer Volume Control
● Nine Fixed Feature Buttons (* = with status LED)
Conference
Speakerphone*
Drop
Message*
Transfer
HFAI*
Hold
Microphone*
Recall
● 34 Programmable Feature Buttons (each equipped with I-Use and status LEDS);
For General Use:
—
All programmable; default assignments are System Access (2), Repertory
Dialing (2), Flex DSS (27), Send All Calls (1), Account Code Entry (1), and Last
Number Dialed (1).
For Use as a Direct Trunk Attendant Console:
— Six predefined: Start, Cancel, Release, Return-On-Don’t-Answer, Return-On-
Busy, and Alarm.
— Other 28 programmable;
default assignments are System Access (2),
Repertory Dialing (2), Flex DSS (1), Account Code Entry (1), Attendant
Message Waiting (1), Night Service (1), trunk appearances (15 as Personal
Lines**), Group Call Coverage (1), Direct Facility Access† (3), and Last
Number Dialed (1).
4-42