Instruction manual

HARDWARE DESCRIPTION
7305H04C Voice Terminal (BIS With Display) (PEC 3162-DIS)
The 7305H04C voice terminal (Figure 4-13) is available for general use and as a Switched
Looped Attendant Console (SLAC). Display capability can be administered for SLACs or
general use positions.
In general use, this terminal can be desk or wall mounted; as a
console, it is normally desk mounted. The terminal is about 9-1/4 inches wide, 9-1/4 inches
deep, and (not including the handset) 1-1/2 inches thick; when desk mounted, it is about 5-
1/4 inches high in the back. The set comes equipped with the following:
● Handset
● Touch Dial Pad (not DTMF)
● I-Use and Status LEDs
● Test/Program Switch (two positions: T for testing operation of LEDs and ringer; P for
programming feature buttons)
● Built-In Display Module
— Screen for call information and time displays
— Clock/Timer controls
— Contrast control for screen display
● Built-In Speakerphone with Volume Control
● Built-In HFAI Microphone
● Ringer Volume Control
● Nine Fixed Feature Buttons (* = with status LED)
Conference
Hold
Message*
Drop Speakerphone*
Microphone*
Transfer
Recall
HFAI*
● 34 Programmable Feature Buttons (only 12 have associated LEDs);
For General Use:
—
All programmable; default assignments are System Access (2), Repertory
Dialing (2), Flex DSS (27), Send All Calls (1), Account Code Entry (1), and Last
Number Dialed (1).
For Use as a Switched Loop Attendant Console:
— Five predefined as loop buttons.
4-34