Instruction manual

HARDWARE DESCRIPTION
7305H03B Voice Terminal (BIS) (PEC 3162-BIS)
The 7305H03B voice terminal (Figure 4-12) is available for general use and as a Direct Trunk
Attendant Console. It can be desk or wall mounted and is about 9-1/2 inches wide, 5-1/4
inches high, and 9-1/4 inches deep. The set comes equipped with the following:
● Handset
● Touch Dial Pad (not DTMF)
● I-Use and Status LEDs
● Test/Program Switch (two positions: T for testing operation of LEDs and ringer; P for
programming feature buttons)
● Built-In Speakerphone (BIS) with Volume Control
● Built-In HFAI Microphone
● Ringer Volume Control
● Nine Fixed Feature Buttons (* = with status LED)
Conference
Recall
Drop
Message*
Transfer Microphone*
Hold
HFAI*
Speakerphone*
● 34 Programmable Feature Buttons (Only 12 have associated LEDs; programmable
buttons without LEDs should be used only for features that do not require I-Use and
Status indications.)
For General Use:
—
All programmable; default assignments are System Access (2), Repertory
Dialing (2), Flex DSS (27), Send All Calls (1), Account Code Entry (1), and Last
Number Dialed (1).
For Use as a Direct Trunk Attendant Console:
— Six predefined: Start, Cancel, Release, Return-On-Don’t-Answer, Return-On-
Busy, and Alarm.
— Other 28 programmable;
default assignments are System Access (2),
Repertory Dialing (2), Flex DSS (1), Account Code Entry (1), Attendant
Message Waiting (1), Night Service (1), trunk appearances (15 as Personal
Lines**), Group Call Coverage (1), Direct Facility Access† (3), and Last
4-32