Instruction manual

HARDWARE DESCRIPTION
7305H02D Voice Terminal (34-Button Deluxe) (PEC 3162-417)
The 7305H02D voice terminal (Figure 4-11) is available for general use and as a Direct Trunk
Attendant Console. The voice terminal is about 10-1/4 inches wide, 5-1/2 inches high, and
8-1/2 inches deep. It comes equipped with the following:
● Handset
● Touch Dial Pad (not DTMF)
● I-Use and Status LEDs
● Test/Program Switch (two positions: T for testing operation of LEDs and ringer; P for
programming feature buttons)
● Built-in Speaker
● Speaker/Ringer Volume Control
● Seven Fixed Feature Buttons (* = with status LED)
Conference
Speaker*
Drop
Message*
Transfer
Recall
Hold
● 34 Feature Buttons (each equipped with I-Use and Status LEDs)
For General Use:
—
All programmable; default assignments are System Access (2), Repertory
Dialing (2), Flex DSS (27), Send All Calls (1), Account Code Entry (1), and Last
Number Dialed (1).
For Use as a Direct Trunk Attendant Console:
— Six predefined: Start, Cancel, Release, Return-On-Don’t-Answer, Return-On-
Busy, and Alarm.
— Other 28 programmable;
default assignments are System Access (2),
Repertory Dialing (2), Flex DSS (1), Account Code Entry (1), Attendant
Message Waiting (1), Night Service (1), trunk appearances (15 as Personal
Lines**), Group Call Coverage (1), Direct Facility Access† (3), and Last
Number Dialed (1).
** On the first Attendant Console, the first 15 trunks in the system are
assigned button appearances on the console. If there are fewer than 15
trunks, the remaining buttons are not assigned. On the second Console,
these trunks do not receive default assignments.
4-30