Instruction manual

FEATURES AND SERVICES
—
The “9” is used to access the remote PBX’s ARS.
—
The “ ✶ ” represents a pause of 1.5 seconds (allows time for dial tone to
occur).
—
The “555 4343” defines the local address of a private network and its
internal routing table.
— The “ ✶ ” represents a 1.5 second pause.
—
The “#5” indicates that the destination number should be inserted here,
rather than at the end of the VF translation.
— The “ # ✶ ” indicates that the system should transmit a “ ✶ ” symbol as the
first character of an identification code.
—
The “12345” represents the remaining characters in the identification code.
● Example 3:
VF Code = #195, VFN = 104 5554567 ✶✶✶✶ 1234 ✶ 9
This example demonstrates how a VF might be used in place of a tie trunk group
connecting two local PBXs, when you have permission to access the other PBX’sS
facilities to complete calls.
—
The first three digits (104) represent the FAC for a CO trunk group.
—
The “5554567” represents the number for the other PBX.
— The “ ✶✶✶✶ ”
represents a 6 second pause (allows time for the other PBX
to answer and return new dial tone).
— The “1234” represents a
“barrier” (security) code required to access the
other PBX’s facilities.
—
The ✶ represents a 1.5 second pause.
—
The “9” represents an ARS access code for the other PBX.
—
Since “#5” was not used within the VFN, the destination telephone number
(dialed digits) will be transmitted after this ARS access code.
2-358