Instruction manual

FEATURES AND SERVICES
● If the user selects
<View options>, the following menu is displayed:
OPTIONS CURRENT
REQUESTED
Speed (highest)
9600
4800 (Auto)
Parity
Even Even
Mismatch Yes Yes
Local Echo Yes
Yes
Answer Text
Yes Yes
Connect Indicat.
Yes Yes
Recall Sequence Br-Br
Br-Br
The value in the CURRENT column indicates the current (active) status of the option.
The value in the REQUESTED column indicates the most recently entered value (not
yet enabled).
● If the user selects <Enable options>,
the system incorporates the changes
requested and displays the message DISCONNECTED. If Autobaud is off, the user
must now press BREAK to return to Command Mode. If Autobaud is on, the user
must press BREAK and RETURN to return to Command Mode.
Note:
If a user attempts to enable options during a “SAVE” operation by the
system administrator, the message “options changed FAILED” will be
displayed. The user will be returned to the top level of the Command Mode
menu, and all change requests discarded. After waiting a few minutes, the
user may try again to change his/her data port parameters.
Considerations
For those cases where a
option changes,
the data port to
change.
Interactions
the User
data terminal user accesses various data endpoints, each requiring
Changeable Options feature simplifies the process of administering
allow data call-setup. A system administrator is not required to enter each
The following feature interacts with User Changeable Options.
Expert Mode: See the Expert Mode feature description for an abbreviated method of
accessing Command Mode menus.
2-354