Instruction manual

FEATURES AND SERVICES
User Changeable Options
Description
User Changeable Options allows a data terminal user who is in the Command Mode to view
and change the settings of certain data port options.
This feature is available to users of
Data Line CP ports; users of STARLAN Interface CP ports cannot change their port options.
Table 2-L contains brief descriptions of the user changeable options.
Table 2-L. User Changeable Options
Option
Definition
Speed
low, 300, 1200, 2400, 4800, 9600, 19200, autobaud
Parity
odd, even
Permit Mismatch
Allows two data endpoints to communicate at
different rates.
Local Echo
Determines whether characters from the data
equipment will be echoed by System 25 during
Command Mode.
Answer Text
Enables call progress messages to be displayed
at the called data endpoint.
Connection Indication
Determines whether users who have Command
Mode enabled will receive the “CONNECTED”
message when a connection has been made.
Recall Sequence
Two short breaks or one long break; the sequence
(disconnect)
used to disconnect a data call.
Note:
The System Administrator may,
under data port administration, deny
permission for users of specific data ports to self-administer these options.
The user selects the Options menu from the Command Mode entry level menu. (Figure 2-62
illustrates all available Command Mode menus.) The user now has the choice of viewing
options, changing options, or exiting the Options menu.
2-350