Instruction manual

FEATURES AND SERVICES
Facility Access Restriction (see “Calling Restrictions”): Stations may be restricted from
dialing the CO trunk pool and/or all (fifteen) other trunk groups (as a whole). Stations so
restricted may still dial out if they are transferred to a trunk by another station not so
restricted.
Tie Trunks: Refer to the “Tie Trunks” feature description.
Toll Restriction (see “Calling Restrictions”): When toll restricted stations access FX, WATS,
or Tie trunks, they are not toll restricted (i.e., toll restriction applies to CO trunks only).
Administration Requirements
Trunk Port:
● Assign Trunk Type And Number.
● Assign Class Of Service Code (DID: 1-4; Other: 0-15).
● Assign Facility Access Code; default codes are based on the CPs in a system. They
are assigned as follows:
Loop Start Trunks - 100.
Ground Start Trunks - 101.
Tie Trunks - 102.
● Allow Dial Access (yes or no; default = yes).
● Assign To DGC Group (Group Number 1-32, or 0 for none; default = 0).
● Make This a Directed Night Service Trunk (yes or no; default = yes).
● Assign Night Service Delay Announcement (Announcement 1 or 2 or 0 for none;
default = 0).
● Dial-Inward Capability (Tone or Pulse; default = Pulse [Tie trunks only]).
Hardware Requirements
Associated trunk port interfaces.
2-348