Instruction manual

System Administration
A-Z or a-z
0-9
✶ , #
.
?
BACKSPACE
RETURN
"
The data transfer rate is set when a carriage return character is received by the
administration port. There are two supported transfer rates: 1200 bps and 300 bps.
Refer to the R3 Administration Manual for administration procedures and additional
information.
SAT Connection Information
Detailed connection information is provided in the following figures:
● Figure 2-57
—SAT On-Premises Direct Connections (Sharing Same AC Outlet)
● Figure 2-58—SAT On-Premises Direct Connections (Greater Than 50 Feet from
System Cabinet or Not Sharing Same AC Outlet)
● Figure 2-59 —SAT On-Premises Switched Connections
● Figure 2-60—SAT Off-Premises Direct Connections
● Figure 2-61 —SAT Off-Premises Switched Connections
Descriptions of the SIP (Station Interconnect Panel), TAE (Trunk Access Equipment), and
associated cables and adapters, as shown on the figures, are provided under the heading
“Connectivity” in Section 4.
Maximum cabling distances from the system cabinets to the SAT are provided in Section 5,
“Technical Specifications.”
2-321