Instruction manual

FEATURES AND SERVICES
3. After a connection message is received, CAM automatically switches to terminal
emulation (data) mode.
4.
The user may now log into and converse with the remote host
5. To disconnect, the user selects the CAM disconnect command
Figure 2-45. STARLAN NETWORK and System 25 Configuration
The System 25 View of a STARLAN NETWORK
From System 25, the STARLAN CP looks and functions like a TN726 DLC (with only four
ports). The STARLAN CP differs from the DLC in that, when it is dialed, the STARLAN CP
auto-answers the call and provides a second dialing prompt for completing the call to a
STARLAN NETWORK address. Depending on user’s data terminal type, the STARLAN CP
automatically selects the operating mode and enables the user to access and exchange data
over the network as described below.
Procedures for setting up connections (calls) between STARLAN NETWORK devices and
devices connected to System 25 vary, depending on both calling and called device.
Generally, a two-stage dialing procedure is used.
The scenarios described below cover most
situations.
2-296