Instruction manual

FEATURES AND SERVICES
Personal Speed Dialing:
Allows users to program up to twenty Personal Speed Dialing numbers (maximum of 25
characters in length) that are accessible only from their terminals. The numbers are
accessed by dialing associated access codes (#20-#39).
Personal Speed Dialing is authorized on a per-station basis through System Administration.
The System Administrator will inform users if they can use this feature.
Refer to the
“Program” feature description for more Information about programming
Personal Speed Dialing numbers.
If enough storage space is available in memory to allow assignment of a Personal Speed
Dialing number, confirmation tone will be returned after each number is programmed. If not,
reorder tone will be returned.
Note: Personal Speed Dialing is voice terminal oriented, not PDC oriented. A user
who logs in at another terminal cannot use his/her Personal Speed Dialing
numbers.
Considerations
System Speed Dialing allows users to dial a number by simply dialing #100-#189. The
stored number associated with each code is (typically) a common-use phone number and is
programmed via System Administration.
Personal Speed Dialing allows users to program up to twenty numbers for their personal
use; these numbers can only be accessed from the terminal where originally programmed.
The system will compare the restrictions applicable for the voice terminal against the number
associated with the Speed Dialing code, then allow or deny the call just as if the number had
been dialed directly from the terminal.
Interactions
The following features interact with Speed Dialing.
Account Code Entry: Speed Dialing codes may be used to store account codes.
Bridging of System Access Buttons: Personal Speed Dialing is a station oriented feature. If a
station dials a Personal Speed Dialing code (#20-#39) while off-hook on a Bridged Access
button, the system will handle this call exactly as if the code was dialed from this station’s
System Access button.
Calling Restrictions:
A terminal that is restricted from placing a particular call cannot avoid
restriction by using the Speed Dialing feature.
2-292