Instruction manual

Send All Calls
Hands-Free Answer on Intercom: Activating Send All Calls will cause an active AUTO ANS
button to turn off. As long as the Send All Calls feature is in use, AUTO ANS cannot be
turned on.
Line Status Indications:
The line status lights still flash for incoming calls when Send All
Calls is in effect even though normal ringing is cut off.
The lights stop flashing when the
calls are answered by a covering station or dropped by the caller.
Personal Line:
Ringing on Personal Lines is turned off by activation of Send All Calls
whether the station is the principal (owner) of the line or not. Personal Line calls follow the
coverage arrangements of the principal station.
If the principal station is not covered, the
call will simply stay at the principal station until dropped (even if other stations with that
Personal Line have coverage).
Administration Requirements
Voice Terminal Port:
● Assign Send All Calls button.
● Assign single-ring reminder if desired.
● Send ring to bridged stations only, to coverage stations only, or to both?
2-283