Instruction manual

Send All Calls
Send All Calls
Description
This feature allows multiline voice terminal including ATL cordless telephone users to turn off
their ringers and invoke a “do not disturb” condition toward incoming calls. In addition,
users who have coverage or bridged appearances will have those calls directed immediately
to their covering and/or bridging stations, without the normal system ringing delay. Send All
Calls also allows covering users to temporarily remove their voice terminals from the
coverage path.
This feature is activated by pressing the SEND ALL CALLS button. It is deactivated by
pressing the button a second time.
Considerations
Send All Calls gives the user the option of having incoming calls sent directly to coverage or
making the terminal busy to incoming calls without sending them to coverage. The feature is
intended for occasional or temporary use.
Send All Calls must be assigned to a button that has a status light. The light turns on when
the feature is in effect.
The following types of calls always ring at a station, regardless of the status of Send All
Calls:
● Automatic Intercom calls.
● Directed Night Service calls.
● Calls to an extension number that is logged in at the station.
Note: Calls to a floating extension number do not ring when Send All Calls
is in effect.
● Calls returning to a DTAC on RTN-BUSY or RTN-DA buttons.
Send All Calls cannot be assigned to a SLAC. The Attendant Position
a similar capability.
When Send All Calls is in effect at a station and incoming calls are
ringing at the sending station is not necessarily canceled completely.
Busy feature provides
directed to coverage,
A single-ring reminder
for incoming calls is optional, assigned by the System Administrator for each Send All Calls
button.
On calls to non-busy stations where Send All Calls has been activated, the callers hear
ringing until a covering station answers, or,
if the station is not covered, until the call is
dropped.
2-281