Instruction manual

Features and Services
Program Mode: This feature cannot be used by Remote Access callers.
Remote Initialization and Maintenance Service (RIMS): RIMS requires a unique barrier code and
carries special non-administrable restrictions.
Speed Dialing, Personal: This feature cannot be used by Remote Access callers.
Station Message Detail Recording (SMDR): Remote Access calls are included in the SMDR
records. The following unique data is presented for Remote Access calls (in addition to type, data,
time, and duration).
Remote Access-to Inside Number:
● CALLED NUMBER field IN.
● FAC field—the number of the incoming trunk.
● STN field—the dial code of the called party; if the call timed out without any digit having
been dialed, the call goes to the attendant, and the attendant’s PDC is shown.
● ACCOUNT field—the Barrier Code number.
Remote Access-to-Outside Number:
● CALLED NUMBER field—the outside number dialed by the remote caller,
● FAC field—the number of the outgoing trunk or trunk pool.
● STN field—the number of the incoming trunk.
● ACCOUNT field—the Barrier Code number.
A Remote Access call which timed out before barrier code dialing was complete or which had a
non-matching barrier code will be shown in the Station Message Detail Recording, regardless of
how long the call lasted. (For systems using a CAT, bad barrier code calls or remote access timeout
calls less than 30 seconds are shown as having a duration of 30 seconds to assure their display.)
To provide greater clarity associated with the types of failed Remote Access calls, the ACCOUNT
field displays the following:
Non-CAT
● Bad Barrier Code - “BADBC_MATCHED##”
Note: ## is 00 through 14 and indicates the number of digits matched for the best
matched barrier code in the system.
● Incomplete Barrier Code - “RACCESS_TIMEOUT”
CAT
● Bad Barrier Code -
“80” through “94.” (Note: 80 through 94 indicates the number of digits
most closely matching a barrier code in the system; e.g., 80 indicates zero digits matching;
81, one digit; 82, two digits; etc.)
● Incomplete Barrier Code or Time Out - “70”
Transfer: This feature cannot be used by Remote Access callers.
2-276
November 1995