Instruction manual

Remote Access
Interactions
The following features interact with Remote Access.
Account Code Entry: This feature cannot be used by Remote Access callers.
Call Accountability: This feature cannot be used by Remote Access callers.
Calling Restrictions: A barrier code class of restriction (COR) has the same parameters as the
class of service permissions associated with stations. A system-wide default COR must be
administered for use if barrier codes are disabled. Barrier code CORs override the default COR.
Conference: This feature cannot be used by Remote Access callers.
Display: Since remote access calls are all incoming calls, the display at the receiving station
displays the trunk identification (assigned by user). Without a display, the receiving station has no
special indication that this is a remote access call.
A display set user who bridges onto a Personal Line appearance where a remote access call is
active will have the display updated for conference status.
Note that Remote Access trunks should be administered to visually identify them as such.
Direct Group Calling (DGC): Remote Access callers cannot attempt to log in or out of a DGC
group.
Equal Access: Equal Access will not be allowed when entered from a Remote Access trunk after
connection of an outgoing trunk. A reorder tone is added to the call when Equal Access is dialed.
Following: This feature cannot be used by Remote Access callers.
Forwarding: Remote Access calls to a System 25 station that has the Forwarding feature activated
will forward like any other incoming calls to the station.
Hold: This feature cannot be used by Remote Access callers.
Night Service, Directed: Remote Access trunks (dedicated or shared) cannot be given Directed
Night Service treatment.
Night Service, Trunk-Answer-from-Any-Station (TAAS): Remote Access trunks (dedicated or
shared) cannot be given TAAS Night Service treatment. Remote Access callers cannot answer
TAAS Night Service calls.
Park: This feature cannot be used by Remote Access callers.
Pickup: This feature cannot be used by Remote Access callers.
Personal Line: If a Remote Access trunk appears as a Personal Line on a station, and the call is
picked up at any time, any tone in the call will be removed and if the station is a display set, it will
indicate the trunk associated with the call.
November 1995
2-275