Instruction manual

Personal Dial Code (PDC)
Direct Station Selection: If an attempt is made to program a FPDC (rather than a PDC) on a
Flex DSS button, Reorder Tone is received.
Display: Calls to a FPDC signed in at a station covered by an attendant console receive
coverage. However,
the attendant display will show the PDC and name of the covered
station, not the FPDC.
Administration Requirements
System:
● Route calls for unassigned DID numbers to the Attendant (yes or no; default = yes).
● Route calls for not-signed-in FPDCs to the attendant (yes or no; default = yes).
● Add/Delete FPDCs.
2-253