Instruction manual

FEATURES AND SERVICES
currently stored on the button.
Automatic Intercom: Numbers called using an Automatic Intercom button are not saved by
the Last Number Dialed feature. The number currently stored by Last Number Dialed is not
changed by operations of the Automatic Intercom button.
Bridging of System Access Buttons:
The Last Number Dialed feature saves numbers called
from either Bridged Access buttons or System Access buttons.
Call Accountability: When a station user dials ##PDC to provide accountability for a call
and then dials the desired digits the ##PDC is not saved by the Last Number Dialed
feature.
Conference: When a station user adds a party to a conference, the number dialed is saved
as the Last Number Dialed.
Direct Station Selection (DSS): Numbers called using a DSS or Flex DSS button are not
saved by the Last Number Dialed feature. The number currently stored by Last Number
Dialed is not changed by operations of these buttons.
Personal Lines: When a user originates a call from a Personal Line, only the digits dialed
after the line is accessed are saved by the Last Number Dialed feature. The same type of
line must be selected to get dial tone for placing another call using Last Number Dialed. If a
different type of line is used, the call may be directed to the wrong destination.
Pooled Facility—Direct Access:
When a user originates a call from a Direct Facility Access
button. only the digits dialed after the line is accessed are saved by the Last Number Dialed
feature. The same type of button should be selected to get dial tone for placing another call
using Last Number Dialed.
If a different type of button is used, the call may not be
completed properly.
Repertory Dialing: When using a Repertory Dialing button to place a call, the numbers dialed
are saved by Last Number Dialed. When the call is redialed using Last Number Dialed, the
same type of button where dial tone was originally accessed should be used again to ensure
that the call is directed to the correct destination.
Speed Dialing: When using a Personal or System Speed Dialing code to place a call, the
code is saved by Last Number Dialed. When the call is redialed using Last Number Dialed,
the same type of button where dial tone was originally accessed should be used again to
ensure that the call is completed properly.
System Access/System Access Originate Only Buttons:
If a user originates a call from one
of these buttons, the same type of button should be selected for getting dial tone to place a
second call with the Last Number Dialed feature. Using another type of button, such as
Personal Line or Direct Facility Access, to get dial tone may prevent the call from completing
properly.
Transfer: When a station user Transfers a call, the dialed number (of the party to whom the
call is transferred) is saved as the Last Number Dialed.
2-210