Instruction manual

Expert Mode
Examples:
Command: S +1200 -300 +4800
Add 1200 and 4800 baud to the available
speeds, remove 300 baud
Command: PE
Change Parity to Even
Command: MY
Change Mismatch to Yes
If the user enters an invalid Option or setting, the system responds with INVALID OPTION and the
entry is ignored.
Once all changes have been entered, the user enters XE to enable the options.
Considerations
Expert Mode is primarily for use by computer-driven endpoints that can store command sequences
for automated use. However, a user experienced in accessing Command Mode menus may find
Expert Mode to be a faster alternative when operating at slower speeds, since the time required to
display each menu and to input separate commands is essentially deleted.
interactions
The following feature interacts with Expert Mode.
Command Mode: Refer to the Command Mode feature description for a detailed description of
Command Mode and of the various menu items.
Administration Requirements
The data port associated with a data terminal can be administered to allow the user to change
options when in Command or Expert Mode. Otherwise, the user may view the current options but
not change them.
The default prompt for Expert Mode (Command:) maybe changed via system administration.
November 1995
2-177