Instruction manual

FEATURES AND SERVICES
● Send All Calls
When Send All Calls is
information.
If the calls
descriptor “c” appears in
Screen 1
● Transfer
invoked, the sending station still
are being sent to coverage, the
position 16.
146 Pearson,M c
receives incoming call
proceeding-to-coverage
At a station receiving a transferred call, the transfer descriptor “T” is displayed in
position 1 before the transfer is completed.
The transferring party’s number and
name are also shown.
Screen 1
T785 Jones,B
After the transfer is
station reverts to a
party is displayed.
completed, “T” is removed and the display at the transferred-to
standard incoming call format; information about the transferred
Note:
If the transferring station does not have a
party is on an outside trunk, the name of
dialed digits, is displayed.
Automatic Incoming Call Identification
display and the transferred
the trunk, not the originally
This subfeature allows a display set user to automatically receive the identification display for
a new incoming call while busy on another call.
Any existing display is temporarily removed,
and the new information is flashed on Screen 1. The display presented by this feature has
the same format as the display for an incoming call at an idle station.
The automatic display flashes only once for a given incoming call and appears when the call
first rings. If the System Access or Bridged Access button has delayed ringing, the display is
delayed also; if the appearance button is administered not to ring, automatic display is
suppressed.
The automatic display is replaced by another simultaneously incoming call
display or by reinstatement of the original active display. If the user wishes to examine the
call information again, the Inspection Mode must be entered. When administered for a
station, Automatic Incoming Call Identification operates only in Normal Mode, but does not
operate while the user is off-hook and dialing digits.
Automatic Incoming Call Identification
does not revolve use of the Inspection Mode.
It is administrable on an individual display set
basis but is not supported on the SLAC.
2-168