Instruction manual

Display
●
●
●
●
FLEX DSS Button Operation
Operation of a FLEX DSS button that is not programmed with an extension number
generates the display NO INFORMATION.
Forwarding
Reception of a forwarded call follows the standard format for a redirected call, with
the call type descriptor “f” in position 16 of Screen 2.
A forwarding display station receives abbreviated alert when a call is forwarded to an
outside number; the display is flashed on Screen 1 only. The new forwarding
descriptor “F” appears in position 1, followed by the digits of the outside number.
Screen 1
F912325552365
Leave Word Calling (LWC)
If a user successfully activates LWC, the display shows the called extension number
and MSG SENT.
Screen 1
879 MSG SENT
If an LWC attempt is not successful, the display shows the called extension and MSG
DENIED.
Screen 1
879 MSG DENIED
Manual Signaling
A display set receiving manual signaling from another station has SIG in positions 1-
3. The name of the signaling party, if available, or the extension number of the
station from which the signal was sent appears in positions 6-14.
Screen 1 SIG Borden,L
The message is displayed for 5 seconds or until the
receives a call. The signaling party has no display for
user selects another button or
this feature.
2-167