Instruction manual

Direct Station Selection (DSS)
Coverage: DSS calls placed to an individual with Coverage will receive standard coverage
treatment.
Display: Operation of a programmed FLEX DSS button generates a display of the information
stored on the button: if the button is not programmed, NO INFORMATION is displayed.
Direct Group Calling: A DSS button can be assigned to a DGC group. The associated LED
lights steadily when all stations in the group are busy.
Following/Forwarding: DSS calls do receive Following or Forwarding treatment.
Last Number Dialed: Numbers called by pressing FLEX DSS or DSS buttons are not saved
by Last Number Dialed and cannot be redialed with that feature.
Line Selection (Prime Line Preference): When Prime Line Preference is assigned to a DSS
button, the button must be pressed to invoke the busy-to-idle reminder, even though its red
I-Use LED is lighted.
Personal Dial Code (PDC): An attempt to program a FPDC on a FLEX DSS button (rather
than a PDC) results in Reorder Tone.
Pooled Facilities: A pooled facility access code may be stored on a FLEX DSS button (but
not on a DSS button). If so, the button will function very much like a Direct Facility Access
button, with the capability of receiving a busy-to-idle reminder for the pooled facility.
However, this button will not allow access to a dial-restricted facility.
Administration Requirements
Voice Terminal Port:
● Assign DSS and/or FLEX DSS buttons.
2-159