Instruction manual

Direct Group Calling Delay Announcement
Hardware Requirements
The announcement device must automatically hang up at the end of each call so that the
incoming call can be returned to the DGC queue.
Each announcement device requires a port on a ZTN78 Tip Ring Line (or TN742 Analog Line)
CP. The system supports up to 32 DGC delay announcements.
For Music-On-Hold hardware information, refer to the “Music-On-Hold” feature description.
Detailed connection information is provided in Figure 2-25.
Descriptions of the SIP (Station Interconnect Panel), TAE (Trunk Access Equipment). and
associated cables and adapters, as shown on the figures, are provided under the heading
“Connectivity” in Section 4.
SYSTEM 25
CABINET
PART OF
OCTOPUS
PART OF
CABLE
SIP
TN742
C2
SIP
W1
>
C5
DELAY
OR
ADAPT.
B1
> ANNOUNCEMENT
ZTN78
EQUIPMENT
LEGEND:
TN742 -
ZTN78 -
B1 -
C2 -
C5 -
W1 -
*-
Figure 2-25.
ANALOG LINE CP
TIP RING CP
TYPICAL-103A CONNECTING BLOCK*
OCTOPUS CABLE (WP90780) - PEC 2720-05P
M0DULAR CORD (D4BU-87)
4-PAIR INSIDE WIRING CABLE*
FURNISHED BY INSTALLER
Delay Announcement Equipment Connections (FCC Registered)
2-151