Instruction manual

FEATURES AND SERVICES
Voice Terminal Port:
● Assign DSS access buttons, as desired
Hardware Requirements
Customer-provided dictation equipment suitable for connection to a telephone system.
Port on a ZTN78, TN742, or TN763 CP, as required.
If the equipment requires a contact
closure, the TN763 and supporting equipment must be used.
Detailed connection
information is provided in Figure 2-22.
Descriptions of the SIP (Station Interconnect Panel), TAE (Trunk Access Equipment), and
associated cables and adapters are provided under the heading “Connectivity” in Section 4
of this manual.
SYSTEM 25
CABINET
PART OF
OCTOPUS
SIP
PART OF
CABLE
TN742
C2
SIP
W1
>
C5
DICTATION
OR
B1
ADAPT.
> EQUIPMENT
ZTN78
(NOTE)
LEGEND:
TN742 -
ANALOG LINE CP
ZTN78
- TIP RING LINE CP
B1 -
TYPICAL-103A CONNECTING BLOCK*
C2 - OCTOPUS CABLE (WP90780) - PEC 2720-05P
C5 - MODULAR CORD (D4BU-87)
W1 -
4-PAIR INSIDE HIRING CABLE*
*-
FURNISHED BY INSTALLER
NOTE:
Figure
IF CUSTOMER DICTATION EQUIPMENT REQUIRES A CONTACT
CLOSURE, A TN763 AUXILIARY TRUNK CP MUST BE USED. REFER
TO THE “PAGING SYSTEM ACCESS” FEATURE DESCRIPTION FOR
TYPICAL CONNECTION INFORMATION.
2-22.
Dictation System Connections (FCC Registered)
2-144