Instruction manual

FEATURES AND SERVICES
b. Data Terminal Dialing
Data Terminal Dialing provides call setup from terminals and host computers
c. Transfer To Data
Transfer To Data is the preferred method of data call origination from multiline voice
terminals equipped with Transfer to Data (DATA) buttons and associated digital data
endpoints. The DATA button is associated by DDC with a near end data endpoint. A
unique DATA button must be provided for each DDC that the voice terminal is
capable of controlling.
Associated with each DATA button is an LED that reflects the
status of data endpoints as follows:
● Dark—Data endpoint is idle
● Winking
—Data endpoint is reserved (preindicated)
● Flashing—
Data endpoint is being alerted of an incoming call
● On Steady
—Data endpoint is either in the on-line (off-hook) state or is
reserved for another user and busy.
Refer to the following feature descriptions for additional information:
● Command Mode
● Data Call Setup
● Data Terminal Dialing
● Expert Mode
● Modem Pooling
● Third-Party Call Setup.
● Transfer To Data
2-134