Instruction manual

FEATURES AND SERVICES
<Voice call>:
The data terminal user can originate a call for an on-premises source voice or data terminal
to a remote terminal by selecting <Voice call> and dialing the required digits. Refer to the
“Third-party Call Setup” feature description for a complete description of this feature.
<Options>:
If the Command Mode menu item <Options> is chosen, the terminal displays the data port’s
administered options.
System default values for each option are also shown. The display
shown below is similar to what is actually presented on the screen. (See Tables 2-G and 2-
H) for additional information on options.)
OPTIONS
Speed (highest)
Parity
Mismatch
Local Echo
Answer Text
Connect Indication
Recall Sequence
<exit>
CURRENT
9600
Even
Yes
Yes
Yes
Yes
Br-Br
<Change options>
The System Administrator can change options or can
DEFAULT
19200 (Auto)
Even
No
Yes
Yes
Yes
Br-Br
<View options>
authorize data terminal users to
change their own options.
Selection of <Change options> from the sub-menu shown above
allows the data terminal user to change the values in the
CURRENT column. Refer to the
“User Changeable Options” feature description
for complete information on this feature.
<Hangup>:
The <Hangup> option can be used to terminate a connection to the data port. This option is
needed for AT&T STARLAN NETWORK endpoints to disconnect from a STARLAN Interface
CP through Command Mode. Accessing <Hangup> provides the user with these options:
●
<eXit> —Do not hang up. Return to the top level of Command Mode.
●
<All> —Hang up (disconnected).
2-98