Instruction manual

Callbaok Queuing
Note: It is highly recommended that queue size be set to either 0 or 64, not to some number
in between.
● Assign the minimum time between callback attempts for inside calls (0 to 120 seconds;
default = 30).
● Assign the minimum time between callback attempts for outside calls (0 to 120 seconds;
default = 30).
Voice Terminal Ports: (Every station has independent control of the number of callback retries and
the number of rings per attempt.)
● Assign the number of callback retries for inside calls (0 to 15; default = 2).
● Assign the number of callback retries for outside calls (0 to 15; default = 2).
● Assign the number of rings per callback attempt for inside calls (2 to 15; default = 3).
● Assign the number of rings per callback attempt for outside calls (2 to 15; default = 3).
● Allow automatic queuing for inside calls (yes or no; default= no).
● Allow automatic queuing for outside calls (yes or no; default = yes).
Trunk Ports:
● Allow queuing of dial access calls (yes or no; default= no).
November 1995
2-87