Instruction manual

Features and Services
The following table summarizes CAS station and account capacities.
AT&T CALL ACCOUNTING SYSTEMS
CAS Model Stations Account Codes
200
100 5000
300
150 5000
500 500 5000
2000 2000 15000
Refer to the CAS documentation supplied with the software package for additional information.
Considerations
The CAS provides customers with an efficient tool to control and manage their telephone usage and
costs. The information available can be used to facilitate cost allocation, traffic analysis, and abuse
control.
Administration Requirements
System:
● Send SMDR Records to SMDR Port (yes or no; default = yes).
● Minimum length (seconds) of calls that are reported by SMDR (10-255; default = 40).
● Type of SMDR peripheral: CAT or non-CAT (yes = CAT, no = non-CAT; default = non-
CAT).
Hardware Requirements
CAS Model 200, 300, 500, or 2000 applications software must be run on an AT&T personal
computer equipped with MS-DOS (V2.11 or later) or on a UNIX PC Master Controller.
SMDR port parameters areas follows:
● No parity; bit is set to zero.
● 1 start bit, 1 stop bit, and 7 data bits.
● Baud rate defaults to 1200 (can be set to 300).
2-78
November 1995