Instruction manual

FEATURES AND SERVICES
Park: If a station is active on a bridged call appearance and activates Park, the call is parked
on the Personal Dial Code (PDC) number of the principal station, not of the bridging station.
If the parked call is not answered, it will return on the principal’s SA button.
Personal Speed Dialing: Personal Speed Dialing is a station-oriented feature. If a station
dials a Personal Speed Dialing code (#20-#39) while off-hook on a BA button, the system
will handle this call exactly as if the code was dialed from this station’s SA button.
Pickup: Pickup is a station-oriented feature.
Thus, calls ringing at a principal SA button can
be picked up by members of the principal’s Pickup Group; calls ringing at a BA button can be
picked up by members of the bridging station’s Pickup Group. If a user dials the Group
Pickup access code while active on a BA button, the system interprets this as an attempt to
pick up a call in the Pickup Group of the bridging station, not of the principal station.
Calls ringing at either a principal SA button or an associated BA button can be picked up by
using the Directed Pickup feature.
Pooled Facility—Dial Access: A station originating a call on a BA button and using a facility
access code is granted access to that pool according to the Calling Restrictions assigned to
the bridging station, not the principal station.
Prime Line Preference: A BA button can be specified as the preferred line for outgoing calls
when the station goes off-hook.
Program: A bridging station user can program only the Personal Speed Dialing codes, REP
DIAL buttons, and FLEX DSS buttons associated with the bridging station, not with the
principal station.
Repertory Dialing: If a station user selects a bridged appearance for an outgoing call and
then depresses a REP DIAL button, the digits programmed into the button are outpulsed as
they would be if the user had selected one of the station’s own SA buttons.
Ringing Line Preference:
If a station has ringing line preference enabled and has a ringing
bridged call appearance, an on-hook user is connected to the bridged appearance if the set
goes off-hook. This is the same as current System 25 operation.
Send All Calls: The principal station can be administered so that pressing the SEND ALL
CALLS button will send ringing for incoming calls to its coverage stations only, to its bridging
stations only, or to both.
If ringing is sent to a BA button via Send All Calls, and if the BA button is administered to not
receive ringing, the call will flash (but not ring) at the BA button. If ringing is sent to a BA
button via Send All Calls, and if the BA button is administered to receive ringing (immediate
or delayed), then the call will ring immediately on the BA button.
Station Message Detail Recording (SMDR): When an outside call is answered or originated
at a BA button, the SMDR record for this call will report the bridging station’s PDC number
under the STN column and the principal station’s PDC number under the PDC column. If the
Call Accountability feature is used when originating a call at a BA button, the PDC column
will contain the accountable (entered) PDC number in place of the principal’s PDC.
2-72