User's Manual

NOTE:
Use only a UL Listed wall plug-in
power transformer
that has Class 2
outputs and the following characteristics:
Input rating:
99-127 V AC rms 60 llz
150
mA
maximum
0utput rating:
27-35 V DC at 200 mA
14-18 V DC at 200 mA
The power transformer
supplied
with the
ConntecT/R has these characteristics.
Step 3 — Test the equipment.
After the
SPIRIT
Attendant ConnecT/R is
Installed, test the
SPIRIT
Attendant by placing a
call to be answered by the SPIRIT Attendant.
NOTE:
If the caller requests the
SPIRIT
Attendant to transfer a call to an
extension
number that is between the valid pro-
gramed lowest and highest extension but
there is no station set plugged into that
station port, the caller will be placed on
hold and the
SPIRIT
Attendant will not bc
able to retrieve the call. To help prevent
this from occuring, careful attention
should be given to setting the lowest/
highest extension numbers and try to avoid
skipping over extension numbers while
assigning them.
If you have any problems, see the Troubleshoot-
ing section of this manual for more information.
7