User`s manual

7
Getting started
Belt clip & optional headset
Plug 2.5 mm headset
into jack on side of
handset (beneath small
rubber flap).
For hands-free telephone conversations, you can use any industry standard 2.5
mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset.
To purchase a headset, visit our website atvisit our website at www.telephones.att.com or call
1 [phone]. In Canada dial 1 [phone].
Lift the rubber
flap here.
Side of handset
To attach the belt
clip:
Snap the belt clip
into the retaining tabs
on both sides of the
handset as shown in the
figure.
To remove the belt
clip:
Gently lift either of the
belt clip retaining tabs,
shown in the figure,
outwards to remove
the belt clip from the
handset.