Quick start guide SL82208/SL82308/SL82408 DECT 6.
Battery installation & charging Install the battery as shown below. After installing the battery, you can make and receive short calls. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides approximately five hours of talk time and three days of standby time. Step 1 Step 2 Step 3 Plug the battery securely into the plug inside the handset battery compartment, matching the color-coded label.
Installation Your product may be shipped with a protective sticker covering the handset or base display, remove it before use. Install the telephone base close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat surface. For optimum range and better reception, place the telephone base in a high and open location. Avoid placing the telephone base too close to: • Communication devices such as: television sets, VCRs, or other cordless telephones.
Telephone base and charger installation Telephone base installation 2. Plug one end of the 1. Plug the small end telephone line cord into the telephone jack at the bot tom of the telephone base. of the larger power adapter into the power jack at the bottom of the telephone base. 3. Route cords through slots. 4. Plug the other end of 5. Plug the large end of the larger power adapter into an power outlet not controlled by a wall switch.
Quick reference guide Handset DIR / CID MENU/SELECT Press DIR to display directory entries. Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press to display the menu. Once in the menu, press to select an item or save an entry or setting. Press CID to display caller ID information. Press to scroll down while in menus. While entering names or numbers, press to move the cursor to the left. During a call, press to hang up.
Quick reference guide Telephone base CHARGE On when the handset is charging in the telephone base. VOICEMAIL Flashes when you have new voice mail. This service is provided by your local telephone company, (different from the answering system on the telephone base). IN USE • On when one of the handsets is in use or when the answering system is answering an incoming call. • Flashes when another telephone is on the same line. • Flashes quickly when there is an incoming call.
www.telephones.att.com © 2007 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Knowledge Ventures, licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 08/07.
