User Manual

Troubleshooting
My repeater cannot register to my telephone base.
First try all the suggestions on the previous page.
Make sure your telephone base is a SynJ SB67118/SB67138/
SB67158 DECT 6.0 4-line corded/cordless telephone system.
Carefully follow the registration instructions on page 3 of this
user’s manual.
Make sure your telephone base is within 980 feet of the repeater. If
registration does not work, place the repeater next to the base and
try registering again.
My repeater flashes slowly again after registration.
First try all the suggestions on the previous page.
Make sure the telephone base has power.
I cannot deregister my repeater from the previous telephone base.
You can register a repeater to a SynJ SB67118/SB67138/SB67158
telephone base without deregistering it from the previous telephone
base. New registrations overwrite any previous repeater registrations.
Power failure recovery.
Your registered repeater automatically links to the telephone base
wherever power is restored. The STATUS indicator light is on when
there is a valid link.
•
•
•
•
•
•
•
•
9