Specifications

SB67080 Expansion Module Installation and Configuration Guide Back to Contents
Troubleshooting 38
Backing Up and Restoring Expansion Module Settings
If need to reset the Expansion Module to factory defaults, you may want to save the
device settings. You can then restore the settings after the Expansion Module is
reconnected to the system.
To back up the Expansion Module settings:
1. Log on to the WebUI as administrator. Click Device Management, then Back
up/Restore, and then EM Settings in the navigation menu at left.
2. Select the extension from the Select Expansion Module to Back up list, and click
the
Back up Expansion Module Settings button to save the file to a specified
location on your computer. You will need to locate and retrieve this file later, so make
sure you remember where you saved it. The default file name will be in the format:
backup_em_[device number]_[year]-[month]-[day]_[time].cfg.
If you back up the same device less than one minute after creating the backup, you
may overwrite the earlier backup file.
To restore the Expansion Module settings:
1. Log on to the WebUI as the Administrator at the PC where you stored the backup file.
2. Click Device Management, then click Back up/Restore, then EM Settings.
3. Under Restore Expansion Module Settings, select the Expansion Module from the
Select Expansion Module to Restore list.
4. Click Browse..., then select the backup file.
5. Click Restore Expansion Module Settings.