Specifications

SB67080 Expansion Module Installation and Configuration Guide Back to Contents
Configuration 23
WebUI Overview
If two Synapse devices are connected to the LAN, and as long as one Synapse device is
currently on the same subnet as a PC, you can use the WebUI to administer the system.
Only one person should log in as system administrator at a time to prevent accidentally
overwriting and losing intended changes.
Any PCs used for configuring the WebUI must be connected to the same IP subnet as
the devices they will manage, or to other subnets that the PCs can communicate with.
Confirm either that all devices are connected to the same router, or that the first three
octets of the IP address are the same for all system devices. The Expansion Module
displays its IP address on the Device Information page, available from the Main Menu.
In most cases there are multiple settings on one page. Changing a setting does
not instantly apply the new value. Click Apply on the WebUI to save all
changes on that page.