Specifications

SB67080 Expansion Module Installation and Configuration Guide Back to Contents

Configuration 21

Setting the IP Configuration (Auto or Static)

The Expansion Module is configured for automatic IP assignment by default, so changing

this setting is only necessary if you require a static IP address for the device.

To set the IP Configuration:

1. From the IP Settings menu, press the key adjacent to IP Configuration.

The IP Configuration screen appears.

2. Press the keys adjacent to

 or  to select Auto or Static.

3. Press to accept the changes and return to the IP Settings menu. If you

selected Static, see “Set/Edit Static IP” below.

Set/Edit Static IP

If your business requires a static IP address, contact your network administrator.

To set and edit the static IP Address:

1. On the IP Settings screen, press the key adjacent to Set/Edit Static IP.

The Set/Edit Static IP screen appears.

Set IP to: Auto

IP CONFIGURATION

Save

Cancel

Save

IP Address:

SET / EDIT STATIC IP

Save

Cancel

000.000.000.000

Subnet Mask:

Gateway:

DNS Server:

000.000.000.000

