Specifications

SB67080 Expansion Module Installation and Configuration Guide Back to Contents
Configuration 20
Expansion Module IP Settings
Synapse devices are connected to a LAN so they can communicate with each other. See
“System Overview” on page 6 and “Appendix A: IP Addresses and Connectivity” on
page 49 for a discussion of the Synapse network configuration and IP settings.
To display the IP Settings screen:
1. Press and hold the SHIFT key for five seconds. The MENU appears.
2. On the MENU, press the key adjacent to IP Settings.
3. On the IP Settings screen, press a key to select:
a. IP Configuration. See “To set the IP Configuration:” on page 21.
b. Set/Edit Static IP. You can change the static IP from the Expansion Module.
See your network administrator if you require details regarding IP assignments.
See “To set and edit the static IP Address:” on page 21.
c. IP Status. See “To view the IP status:” on page 22.
Display Settings 
MENU
IP Settings 
Device Information 
Cancel
IP Configuration 
IP SETTINGS
Set / Edit Static IP 
IP Status 
Cancel
Expansion Module Menu
IP Settings Menu