Specifications

SB67080 Expansion Module Installation and Configuration Guide Back to Contents
Installation 14
To connect the Expansion Module with a shared network connection with a
Deskset:
You can connect the Expansion Module to a Deskset so that the Expansion Module and
Deskset share a network connection.
1. Plug a Cat.-5 Ethernet cable into the Network port on the back of the Expansion Module.
2. Plug the other end of the cable into the PC port on the back of the Deskset.
To connect the Expansion Module without a shared network connection with
a PC:
If a dedicated network connection is available, then connect the Expansion Module to the
network connection only.
1. Plug a Cat.-5 Ethernet cable into the Network port on the back of the Expansion Module.
2. Plug the other end of the cable into the Ethernet wall jack.
LAN/Ethernet
Wall Jack
Expansion Module
Synapse Deskset
LAN/Ethernet
Wall Jack
Expansion ModuleSynapse Deskset