Specifications

SB67080 Expansion Module Installation and Configuration Guide Back to Contents

Installation 13

To attach the stand:

1. Select a Expansion Module position. The stand provides two positions to match the

angle of the paired Deskset. Option 1 is 45° and Option 2 is 60°.

2. Place the Expansion Module on a flat surface with the power and network ports

facing you.

3. Place the stand on the base with the flexible tab side away from you.

4. Insert the solid tabs of the stand into the Option 1 or Option 2 slots on the base

(shown marked in red below).

5. Rotate the stand away from you until it rests against the base and you hear a click

as the flexible tabs lock into place.

Option 1

Option 2

Flexible Tabs

Flexible tabs

Solid tabs

Option 1

Option 2