Specifications

SB67080 Expansion Module Installation and Configuration Guide Back to Contents
Installation 12
Expansion Module Installation
Figure 4 identifies the features on the back of the Expansion Module.
Figure 4. Expansion Module Connections
1. Network Port Connects to the paired Desksets or the LAN switch used by the
Synapse system. The two LEDs next to the network port indicate
network status and AC power status.
 Green—on when the unit is connected to the network
and has power.
 Yellow—flashes when there is network activity.
2. PC Port For connecting an end-user PC.
3. Reset Button Restarts the Expansion Module when pressed momentarily.
Restores factory defaults when pressed and held for more than
five seconds with the LAN cable not connected.
4. Power Jack The unit also supports Power over Ethernet.
5. Stand tab slots Allow the stand to be attached in two different positions.
1
2
3
4
5