Installation guide
Synapse Installation Guide Back to Contents
System Configuration 77
Accessing the Administrator WebUI
To access the browser interface and log on:
1. Ensure your computer is connected to the same IP subnet as the Synapse system.
You can connect your computer to the PC port on the back of a Deskset.
2. On the Deskset, press MENU and then 4. The Deskset Information screen appears.
3. Find the IP address on the Deskset Information screen.
4. On your computer, open an Internet browser.
5. Type the Deskset IP Address in the browser address bar, and press ENTER on your
computer keyboard.
The Login page appears in the browser.
6. Enter admin in the Login Name field and 12345 in the Password field, then click
. You may change the Admin ID and password once you have logged on.
The System Information page appears.
Deskset Information
Quick
Dial
Model No: SB67031
Status: Synchronized*
IP Address: 192.168.0.10
MAC Address: 00:11:A0:11:EA:4D
Serial No: GG20013043
Boot Ver: 2.7.1
P Firmware Ver: 3..
Exit
Use or to scroll. Press Exit when
done.
'HVNVHW,QIRUPDWLRQ
0RGHO1R6%
6WDWXV6\QFKURQL]HG
,3$GGUHVV
SB6702x Deskset Information Screen
SB6703x Deskset Information Screen
You can also use a Gateway IP address (shown in Figure 34 on page 61) to
log on to the WebUI.