Installation guide

Synapse Installation Guide Back to Contents
Getting Started 73
 Pressing when the cursor is positioned next to a dot deletes the dot
and the digit to the left of the dot.
5. Press
 or  to cycle through the four fields.
6. Press to accept the changes and return to the Admin Settings menu.
IP Status
This screen is for informational purposes only.
To view the IP status:
1. Access the Admin Settings menu:
a. Press MENU, and then press 3 on the dial pad.
b. Enter the Admin password, and then press SELECT.
2. Press 3 on the dial pad. The IP Settings screen appears.
3. On the IP Settings screen, press 3. The IP Status screen appears.
4. Press
 or  to view status entries that are not shown on-screen.
5. Press [SB6703x] or CANCEL [SB6702x] to return to the Admin Settings
menu.
Backspc
Save
IP Status
IP Type Auto
IP Address 192.168.0.123
Use or to scroll. Press Exit when
done.
Quick
Dial
Subnet Mask 255.255.255.0
Gateway 192.168.0.1
MAC Address 00:11:A0:00:12:8D
Network Port Connected
PC Port Connected
Exit
,36WDWXV
,37\SH
,3$GGUHVV
6XEQHW0DVN
$XWR


SB6703x Deskset IP Status
SB6702x Deskset IP Status
The list is not circular, so when you reach the end of the available text, pressing
 has no effect. If you are at the top of the screen, pressing  has no effect.
Exit