Installation guide

Synapse Installation Guide Back to Contents

Installation 36

Deskset Installation

Figure 19 identifies the features on the bottom and side of the Deskset. You can install

the Deskset on a desktop or mount it on a wall. Figure 19 represents the SB6703x

Deskset. Although the SB6702x Deskset is slightly different, its features have the same

basic layout.

Figure 19. Deskset Connections

Before adding new Desksets to the system, please ensure that the system is

running the latest software. To update the software on all devices, see

“Updating Devices” on page 89.

1. Network Port The two LEDs next to each network port indicate network

status and AC power status.

 The green LED is on when the Deskset is connected to

the network and has AC power.

 The yellow LED flashes when there is network activity.

2. PC Port

3. Reset Button Restarts the Deskset when pressed momentarily.

Restores factory defaults when pressed and held for more

than five seconds with the LAN cable not connected.

4. Power Jack SB6702x and SB67031/035 Desksets also support Power

over Ethernet.

1 2