Installation guide

Getting Started 85
Synapse Installation Guide
IP Status
This screen is for informational purposes only.
 To view the IP status:
Figure 84. 030/031 IP Settings
Figure 85. 030/031 IP Status
1. Access the Admin Settings menu: Press MENU,
then press 3 on the dial pad, then enter the
Admin password, and press SELECT.
2. Press 3 on the dial pad to display the IP Settings
screen shown in Figure 84 and Figure 86.
3. Press 3 to display the IP Status screen shown in
Figure 85 and Figure 87.
4. Press the or Navigation key to view status
entries that are not shown on-screen, such as
those shown in Figure 88 and Figure 89.
5. Press to return to the Admin Settings
menu.
Figure 86. 020 IP Settings
Figure 87. 020 IP Status 1
Figure 88. 020 IP Status 2
Figure 89. 020 IP Status 3
Quick
Dial
2. Set/Edit Static IP
Save
IP Settings
3. IP Status
1. IP Configuration Auto
Use or to move highlight.
Use or to cy cle through options.
Quick
Dial
Ex it
IP Status
IP Type:
IP Address:
Subnet Mask:
Gatew ay:
MAC Address:
Ne t w or k Po r t :
PC Por t:
DNS Se r ve r 1:
Auto
192.168.0.123
255.255.255.0
192.168.0.1
00:11:A0:00:12:8D
Connected
Connected
192.168.0.134
Use or to scroll. Press
Ex it
when
done.
The list is not circular, so when you reach the
end of the available text, pressing the
Navigation key has no effect. If you are at the
top of the screen, pressing the Navigation
key has no effect.
IP Settings
1. IP Configuration
2. Set/Edit Static IP
3. IP Status
IP Status
IP Type:
IP Address:
Subne t M ask :
Auto
192.168.0.123
255.255.255.0
IP Status
Gatew ay: 192.168.0.1
MAC Add: 00:11:A0:00:12:8D
Network Port: Connected
IP Status
Ne t w or k Por t:
PC Por t:
DNS Server 1 192.168.1.1
Connected
Connected